Target Board Information configs

It is necessary to have the bare machine toolset for the appropriate target CPU to be installed in order to download U-Boot or the Linux kernel to the target device using the ST Micro Connect.

This provides the sh4gdb or st200gdb executable and a complete set of command files used by GDB to perform the initial hardware setup.

In order to work correctly with Linux the command files for most boards must be be updated.

The command files are installed by the ST40 toolset in:

/opt/STM/ST40R3.0.3/sh-superh-elf/stdcmd

The command files for the ST200 toolset are in:

<toolset path>/target/board

To update these files download the file, cd to the appropriate directory above and untar the file.