Target Board Information.

These are the target boards currently supported in the STLinux distribution. Older boards not listed here are not supported.

• STMicroelectronics STi5528 Eval (mb376)

• STMicroelectronics STi5528 Espresso reference platform

• STMicroelectronics STm8000 Demo board(mb379)

• STMicroelectronics ST220 Eval board(mb392)

• STMicroelectronics STb7100 MBoard (mb411)
  • STb710x board MODE switch settings

• STMicroelectronics STb710x Reference Board (mb442)
  • Board version information

• HMS1

• STMicroelectronics STb7109E Reference Board (mb448)

• STMicroelectronics ST231 Eval board (mb424)

• STMicroelectronics STi5100/STi5301 Mboard (mb390)

• STMicroelectronics STM8010 MBoard (mb421)

• STMicroelectronics Traviata (mb426)

• STMicroelectronics STx7200 MBoard (mb519)

• STMicroelectronics STx7111 MBoard (mb618)

• STMicroelectronics STx7141 MBoard (mb628)

• STMicroelectronics STx7200 cut 2 MBoard (mb671)

• STMicroelectronics STx7105 MBoard (mb680)

The following STEM modules are also supported.They can be plugged into many of the boards above to provide extra functionality such as Ethernet.

• STMicroelectronics DB558 Ethernet/USB STEM (db558)

• STMicroelectronics DB641 Dual Ethernet STEM (db641)

In addition the STx710x MBoard (mb411) can be fitted with an STx7109, in which case a PHY daughter board is required to use the on-chip Ethernet MAC:

• STMicroelectronics DB666 STx7109 Ethernet PHY

Note that many boards require that the gdb configuration files provided with the ST40/ST200 micro toolset releases are updated for use with Linux. For more details please see the configs page.

Older boards which are no longer supported are listed here for reference purposes only.

• STMicroelectronics/Futarque Mediaref (1070) and MediaX (3700)

• STMicroelectronics STB1 Overdrive (db457)

• STMicroelectronics GX1 Eval (mb317)

• STMicroelectronics STB1 Extended HARP (mb350)
  • Switch settings

• STMicroelectronics ST40RA Eval Board (mb360)

• STMicroelectronics ST40RA DDR Eval board(mb374)