Target Board Information
STMicroelectronics STi5528 Eval (mb376)
|
|
STi5528 Eval (mb376)
This board was designed primarily for silicon validation. As such the chip
is socketed, and there is a large number of connectors to enable all the features
of the chip to be used.
| Board name | STi5528 Eval board |
| Board Id | mb376 |
| Chip | sti5528 |
| Target CPU | ST40-103 |
| Memory | 128Mb |
| Flash | 16Mb |
| STEM connector | Yes |
| On board Ethernet | No |
Hardware Setup
Serial ports
| Front Panel |
Schematic name |
Type |
Chip name |
Device |
Cable type for console |
| RS232 ASC0 | CN37 (bottom) | ASC | ASC3 | /dev/ttyAS0 | Special cable |
| RS232 ASC1 | CN37 (top) | ASC | ASC4 | /dev/ttyAS1 | Special cable |
| RS232 SCIF0 | CN38 (top) | SCIF | SCIF1 | /dev/ttySC0 | Null modem |
| RS232 SCIF1 | CN38 (bottom) | SCIF | SCIF2 | /dev/ttySC1 | Null modem |
To use the ASC ports it is necessary to construct a special cable, as RX and TX are the wrong way round for the gender of
the connector.
Switch settings
| Switch reference |
S1 |
S2 |
S3 |
S4 |
| SW1 |
OFF |
OFF |
OFF |
OFF |
| SW2 |
ON |
ON |
ON |
OFF |
| SW3 |
ON |
OFF |
ON |
ON |
| SW4 |
ON |
ON |
ON |
ON |
| SW5 |
ON |
OFF |
ON |
ON |
| SW6 |
ON |
OFF |
OFF |
OFF |
| SW7 |
ON |
OFF |
ON |
ON |
| SW8 |
OFF |
OFF |
OFF |
OFF |
| SW9 |
OFF |
OFF |
ON |
ON |
| SW10 |
OFF |
ON |
ON |
ON |
| SW11 |
ON |
ON |
ON |
ON |
| SW12 |
OFF |
OFF |
ON |
OFF |
EMI Config
Ethernet STEM
These jumper settings are required for correct operation of the DB558 Ethernet STEM
| Jumper # |
Function Description |
Position |
| J1 | Chip select configuration: use STEM NOT_CS0 |
2-3 |
| J2 | Ethernet interrupt: 0 |
2-3 |
| J3 |
Ethernet NOT_CS select: use decoded NOT_CS |
2-3 |
| J4 |
USB NOT_CS select: use decoded NOT_CS |
2-3 |
| J5 |
MII supply voltage is +3.3V |
1-2 |
| J6 |
EEPROM word size is 16 bit |
2-3 |
| J7 |
USB interrupt |
Not fitted |
The 16 bit modification must not have been performed
Known problems
- PCI is non functional on this board
- ASC Rx/Tx pins wrong way round for gender of connector
|