How To Guide

• Introduction
• How to configure the distribution
  • Setting up DNS
  • Setting up NIS
  • Setting the date and time
  • Setting the hostname
  • Logging in via SSH without a password
  • Control-C on default console
  • Setting the timezone to the local region
• Testing the customizations
  • Testing DNS
  • Testing NIS
  • Testing the date and time
  • Testing logging in via SSH without a password
  • Testing Control-C on default console
  • Testing timezone information
• How to set up an NFS file server
  • Prepare the root file system
  • Set up the NFS server
• How to boot with a ramdisk root file system
• How to boot from ROM
  • Using the Memory Technology Device (MTD)
  • File system background
  • Selecting a file system
  • Using the Flash Translation Layer (FTL)
  • Partitioning Flash
  • Booting from ROM worked example (Flash)
• How to run Quake
• How to use DHCP
• How to install and use Linux support packages (LSP)
• How to configure Point to Point Protocol (PPP)
• How to setup and configure a Universal Serial Bus (USB)
• How to configure a hard disk
• How to use the remote shell (rsh)
• How to use the U-Boot boot loader
• How to boot with a splash screen and a progress bar
• How to profile a STLinux system
• How to import an existing software tree into STWorkbench

You can also retrieve all the documents as one big page suitable for printing or off-line browsing.