STLinux Distribution 2.3 updates

STLinux 2.3 Update: stlinux23-host-stworkbench

Wed, 13 Aug 2008 11:08:11 +0000

Package: stlinux23-host-stworkbench
Version: 3.1.0.1
Release: 16
Updated RPMS:

updates/RPMS/stworkbench/stlinux23-host-stworkbench-3.1.0.1-16.noarch.rpm

Updated SRPMS:

updates/SRPMS/stlinux23-host-stworkbench-3.1.0.1-16.src.rpm

Changes:

Tue Aug 12 2008 Stuart Menefy <stuart.menefy at st.com> 16
- [Spec; Add patch: find-external-requires] Add patch taken from Fedora thunderbird package to only generate dependencies which come from outside the current package.
Tue Jul 22 2008 Chris Smith <chris.smith at st.com> 16
- [Spec] Remove TM terminal features
Thu Jul 10 2008 Chris Smith <chris.smith at st.com> 15
- [Add patch: xulrunner-1.8.1.3.en-US.linux-i686-20080128.tar.gz]
- [Add patch: stworkbench-xulrunner.patch]
- [Bugzilla: 4316] Fix for systems including Firefox 3 (e.g. FC9)

STLinux 2.3 Update: stlinux23-target-stmfb-utils

Wed, 13 Aug 2008 11:08:10 +0000

Package: stlinux23-target-stmfb-utils
Version: 3.0
Release: 12
Updated RPMS:

Updated SRPMS:

updates/SRPMS/stlinux23-target-stmfb-utils-3.0-12.src.rpm

Changes:

Tue Aug 12 2008 Stuart Menefy <stuart.menefy at st.com> 12
- [Spec] Bump version number to force rebuild with 0017 stmfb sources.

STLinux 2.3 Update: stlinux23-host-stmfb-source

Wed, 13 Aug 2008 11:08:09 +0000

Package: stlinux23-host-stmfb-source
Version: 3.0_stm23_0017
Release: 32
Updated RPMS:

updates/RPMS/host/stlinux23-host-stmfb-source-3.0_stm23_0017-32.noarch.rpm

Updated SRPMS:

updates/SRPMS/stlinux23-host-stmfb-source-3.0_stm23_0017-32.src.rpm

Changes:

Tue Aug 12 2008 Stuart Menefy <stuart.menefy at st.com> 32
- [Update: 3.0_stm23_0017] Upgraded to latest release.
- NEW: Support for STx7105.
- NEW: Support for STi5202/MB602.
- NEW: Support for HDMI IT content information in the AVI InfoFrame via a new HDMI device IOCTL STMHDMIIO_SET_CONTENT_TYPE.
- NEW: Added output API function stm_display_output_soft_reset() which when called on master outputs will reset the timing generator causing a top field vsync to be issued immediately. To be used to do a coarse adjustment of the output vsync relative to the input vsync of captured video.
- NEW: HDMI safe mode when EDID is unreadable, as documented in CEA-861-E section F.3.5. The safe mode reports the sink as DVI supporting 640x480p.
- NEW: Added new HDMI device IOCTL STMHDMIIO_SET_EDID_MODE_HANDLING; this changes the behaviour of the HDMI management thread, allowing HDMI to transmit display modes not listed in the connected sink's EDID. The hdmi-control utility has the related new option --edid-mode .
- NEW: Added output API function stm_display_output_set_filter_coefficients() which can be used to change the DENC luma and chroma filters (previous control based mechanism has been removed) and the component analogue DAC sample rate converter filters on 7111/7105/7141 and 7200cut2.
- CHANGE: Updated HDMI EDID parsing and reporting in sysfs for CEA-861-E.
- CHANGE: Do not set the HDMI AVI InfoFrame RGB quantization bits unless the corresponding QS bit in the TV's EDID VCDB block has been set and we are outputting RGB.
- CHANGE: HDMI AVI InfoFrame under/over scan information now supports setting the "not known" value, a new HDMI device IOCTL STMHDMIIO_SET_OVERSCAN_MODE and argument type stmhdmiio_overscan_mode_t has been added; the previous IOCTL STMHDMIIO_SET_VIDEO_SCAN_TYPE has been removed.
- CHANGE: support 1080p50/60 on analogue out where hardware is capable
- [Bugzilla: 4347] Fix 7200cut2 HDMI/SPDIF configuration error.
- [Bugzilla: 4435] Fix HDMI AVI InfoFrame colorimetry bits when outputting RGB.

STLinux 2.3 Update: stlinux23-target-dnsmasq

Wed, 13 Aug 2008 11:08:08 +0000

Package: stlinux23-target-dnsmasq
Version: 2.45
Release: 11
Updated RPMS:

Updated SRPMS:

updates/SRPMS/stlinux23-target-dnsmasq-2.45-11.src.rpm

Changes:

Mon Jul 07 2008 Stuart Menefy <stuart.menefy at st.com> 11
- [Update: 2.45; Security update: CVE-2008-1447; Bugzilla: 4324; Delete patch: dnsmasq-2.33-initd.patch, dnsmasq_2.33-1.diff.gz; Add patch: dnsmasq-2.45-initd.patch, dnsmasq_2.45-1.diff.gz] Update to 2.45 version.

STLinux 2.3 Update: stlinux23-target-linux-kernel-headers

Wed, 13 Aug 2008 11:08:07 +0000

Package: stlinux23-target-linux-kernel-headers
Version: 2.6.23.17_stm23_0116
Release: 39
Updated RPMS:

Updated SRPMS:

updates/SRPMS/stlinux23-target-linux-kernel-headers-2.6.23.17_stm23_0116-39.src.rpm

Changes:

Tue Aug 12 2008 Stuart Menefy <stuart.menefy at st.com> 39
- [Update source: stmfb.h, hdmi.h] Update to version from stmfb-stm23_0017.

STLinux 2.3 Update: stlinux23-target-alsa-utils

Tue, 12 Aug 2008 12:17:15 +0000

Package: stlinux23-target-alsa-utils
Version: 1.0.16
Release: 14
Updated RPMS:

Updated SRPMS:

updates/SRPMS/stlinux23-target-alsa-utils-1.0.16-14.src.rpm

Changes:

Fri Aug 01 2008 Pawel Moll <pawel.moll at st.com> 14
- [Add patch: alsa-utils-1.0.16-iecset_new_channel_status_bits_update.patch] Added support for some new IEC958 bits.

STLinux 2.3 Update: stlinux23-host-u-boot-source-arm

Tue, 12 Aug 2008 12:17:14 +0000

Package: stlinux23-host-u-boot-source-arm
Version: 1.3.1_stm23_0038
Release: 38
Updated RPMS:

updates/RPMS/host/stlinux23-host-u-boot-source-arm-1.3.1_stm23_0038-38.noarch.rpm

Updated SRPMS:

updates/SRPMS/stlinux23-host-u-boot-source-arm-1.3.1_stm23_0038-38.src.rpm

Changes:

Fri Aug 01 2008 Sean McGoogan <Sean.McGoogan at st.com> 38
- [Add patch: u-boot-1.3.1_stm23_0036-20080801.patch.gz; Bugzilla: 4102; Bugzilla: 4173]
- Support for the following two new boards: MB671 and CB102. Both these boards uses STMicroelectronics' STx7200 chip. This update includes testing on both 29-bit and 32-bit (SE) modes.
- Added support for all 256MB of LMI0 RAM (on MB671+CB102) in SE-mode. The new MB671+CB102 boards have 256MB of memory in LMI0. This update has refactored the PMB code, such that there are now two contiguous 128MB PMB entries (instead of just the one) to map the entire 256MB of LMI0 memory. As a result, U-boot will now be located at 0x8FF00000 on boards with 256MB in LMI0 in SE mode. The PMB refactoring has resulted in the following significant changes:
  PMB[0:1] is used to map main memory, and will mostly be used as cached, except on initialization, and when passing control to the linux kernel, where it will be un-cached.
  PMB[2:3] is an alias for PMB[0:1], except it is guaranteed to always be UN-cached. This is required in order that we can safely toggle the cacheability of PMB[0:1].
  PMB[0:1] will map VA 0x80000000 .. 0x8fffffff. (256MB)
  PMB[2:3] will map VA 0x90000000 .. 0x9fffffff. (256MB)
  PMB[4:15] will map VA 0xa0000000 .. 0xbfffffff. (512MB)
  If sizeof(LMI) <= 128MB, then PMB[1] and PMB[3] are unused, i.e. PMB[1].V == PMB[3].V == 0. see include/asm-sh/pmb.h for further details.
- A new U-boot command "pmb" has been added. This new command, which when run, will display the state of all the currently valid PMB entries, in SE-mode. When compiled with the macro DEBUG defined, it will also verify adherence to the aforementioned refactoring requirements of the PMB.
- Fix incorrect probing of AMD (compatible) CFI flash devices. Prior to this fix, CFI flash, compatible with the AMD command set, may be miss-probed, and wrongly identified. This changes addresses this issue. Both INTEL and AMD compatible CFI flash devices should now be correctly identified. For further details, please see: https://bugzilla.stlinux.com/show_bug.cgi?id=4102
- Added support for latest revisions of SMSC LAN8700 devices. The stm-stmac.c driver has been updated to be tolerant of minor revision changes in the PHYID register for both the SMSC LAN8700 and the STMicroelectronics STe101p.
- Bug fix: added 2 NOP instructions to cpu/sh/start.S Added a couple of NOP instructions, to workaround the problem reported in the following bugzilla report: https://bugzilla.stlinux.com/show_bug.cgi?id=4173
- Pad printed memory sizes with a field width of 3. The function print_size() will now pad memory sizes to a field width of 3 (it was 2). This is required as a lot of boards now have > 99MB of RAM on them, and the vertical alignments were inconsistent, when displaying the capacity for a board with a lot of RAM, but a small amount of flash.
- Improved debugging of cpu/sh/start.S. Some additional descriptive symbols are now defined in cpu/sh/start.S, which should facilitate easier debugging of this file.
- Linux Kernel compatibility checking Fixed a minor bug in lib_sh/sh_linux.c, whereby the wrong mode was reported for both linux & U-boot, if the kernel was inappropriate.
- Numerous minor changes.

STLinux 2.3 Update: stlinux23-target-gcc

Tue, 12 Aug 2008 12:17:13 +0000

Package: stlinux23-target-gcc
Version: 4.2.3
Release: 43
Updated RPMS:

Updated SRPMS:

updates/SRPMS/stlinux23-target-gcc-4.2.3-43.src.rpm

Changes:

Fri Jul 18 2008 Carl Shaw <carl.shaw at st.com> 43
- [Update: 4.2.3] Upgrade to latest ST compiler version
- [Add patch: gcc-4.2.3-multilibpath.patch]
- [Add patch: gcc-4.2.3-stm-release.patch]
- [Add patch: gcc-4.2.3-st40r2-4.2.1.patch]
- [Add patch: gcc-4.2.3-linux-multilib-fix.patch]
- [Add patch: gcc-4.2.3-sh-use-gnu-hash-style.patch]
- [Add patch: gcc-4.2.3-sh-linux-atomic-fixes.patch]
- [Add patch: gcc-4.2.3-uclibc-conf.patch]
- [Add patch: gcc-4.2.3-uclibc-locale.patch]
- [Add patch: gcc-4.2.3-uclibc-missing-execinfo_h.patch]
- [Add patch: gcc-4.2.3-uclibc-snprintf.patch]
- [Add patch: gcc-4.2.3-uclibc-complex-ugly-hack.patch]
- [Add patch: gcc-4.2.3-uclibc-libstdc++-namespace.patch]
- [Add patch: gcc-4.2.3-uclibc-libbackend_dep_gcov-iov.h.patch]
- [Add patch: gcc-4.2.3-uclibc-flatten-switch-stmt-00.patch]
- [Add patch: gcc-4.2.3-uclibc-locale_facets.patch]
- [Add patch: gcc-4.2.3-uclibc-libstdc++_no_nls.patch]
- [Delete patch: gcc-4.2.1-multilibpath.patch]
- [Delete patch: gcc-4.2.1-stm-release.patch]
- [Delete patch: gcc-4.2.1-makeinfo.patch]
- [Delete patch: gcc-4.2.1-stm_sh_R4.1_070806.patch]
- [Delete patch: gcc-4.2.1-linux-multilib-fix.patch]
- [Delete patch: gcc-4.2.1-sh-use-gnu-hash-style.patch]
- [Delete patch: gcc-4.2.1-dwarfreg-fix.patch]
- [Delete patch: gcc-4.2.1-packed_align.patch]
- [Delete patch: gcc-4.2.1-sh-linux-atomic-fixes.patch]
- [Delete patch: gcc-4.2.1-switch-tbit.patch]
- [Delete patch: gcc-4.2.1-static_dtors.patch]
- [Delete patch: gcc-4.2.1-sh_cond_branch_size.patch]
- [Delete patch: gcc-4.2.1-uclibc-conf.patch]
- [Delete patch: gcc-4.2.1-uclibc-locale.patch]
- [Delete patch: gcc-4.2.1-uclibc-missing-execinfo_h.patch]
- [Delete patch: gcc-4.2.1-uclibc-snprintf.patch]
- [Delete patch: gcc-4.2.1-uclibc-complex-ugly-hack.patch]
- [Delete patch: gcc-4.2.1-uclibc-libstdc++-namespace.patch]
- [Delete patch: gcc-4.2.1-uclibc-libbackend_dep_gcov-iov.h.patch]
- [Delete patch: gcc-4.2.1-uclibc-flatten-switch-stmt-00.patch]
- [Delete patch: gcc-4.2.1-uclibc-locale_facets.patch]
- [Delete patch: gcc-4.2.1-uclibc-libstdc++_no_nls.patch]

STLinux 2.3 Update: stlinux23-target-hal

Tue, 12 Aug 2008 12:17:12 +0000

Package: stlinux23-target-hal
Version: 0.5.11
Release: 13
Updated RPMS:

Updated SRPMS:

updates/SRPMS/stlinux23-target-hal-0.5.11-13.src.rpm

Changes:

Thu Jul 31 2008 Jon Frosdick <jon.frosdick at st.com> 13
- [Add patch: hal-0.5.11-keys.patch] Fix hard-coded include path of input.h
Wed Jul 09 2008 Francesco Rundo <francesco.rundo at st.com> 12
- [Update: 0.5.11] Latest version with fix related to Dbus communication.
Mon Jul 07 2008 Francesco Rundo <francesco.rundo at st.com> 12
- [Spec] Changed PreReq from initscripts to filesystem

STLinux 2.3 Update: stlinux23-cross-binutils

Tue, 12 Aug 2008 12:17:11 +0000

Package: stlinux23-cross-binutils
Version: 2.18.50.0.8
Release: 24
Updated RPMS:

Updated SRPMS:

updates/SRPMS/stlinux23-cross-binutils-2.18.50.0.8-24.src.rpm

Changes:

Wed Jul 23 2008 Carl Shaw <carl.shaw at st.com> 24
- [Update: 2.18.50.0.8] update to latest open source version for SH4 and ARM
- [Add patch: binutils-2.18.50.0.8-st40r2-sh4-300.patch.gz] Add SH4-300 support
- [Remove patch: binutils-2.18-unaligned-mova.patch] Now part of 2.18.50.0.8